Non Slip Bathtub, Shower and Floor Product Information

Slips and falls on wet surfaces like the shower and bathtub are a major problem for all types of commercial establishments as well as residences. Time tested No. 1001 Anti-Slip Floor and Bathtub Treatment helps solve those costly and dangerous problems. Unlike short-lived non slip floor coatings, No. 1001 microscopically etches a tread into the surface. One treatment is guaranteed to make the surface slip-resistant for a minimum of 4 years, indoors or outdoors. No. 1001 has been used successfully by major restaurant & hotel chains, hospitals, office buildings, etc. for 28 years. One gallon covers 350-400 square feet. The application time,for most tiles, is 30 minutes. The floor is ready to walk on immediately. No. 1001 can be used on tile, marble, granite, terrazzo and concrete.

No. 1001 may also be used on porcelain bathtubs. The treatment takes 5 minutes. Only 4 ounces of product is required per bathtub. When treating fiberglass bathtubs, No 5002 Good Grip should be used.

For Use On

Ceramic, porcelain & quarry tile, marble, granite, terrazzo, cement and bathtubs

Typical Applications:

Restaurants, hotels, supermarkets, hospitals, nursing homes, shopping centers, health clubs,residences,etc.

Coverage:

350 - 400 square feet (32.55 - 37.2 square meters) per gallon (3.79 liters).

Shelf Life:

3 years

Application Instructions:

1. Test in an inconspicuous area to determine treatment time and to check for any change in the tile’s appearance.
2. Pour TRUSTY-STEP ANTI-SLIP FLOOR & BATHTUB TREATMENT on floor.
3. Spread evenly with #9004 applicator.
4. Keep evenly wet for approximately 15-60 minutes (treatment time determined by test), adding additional Trusty-Step as needed.
5. Rinse with water.
6. Squeegee dry.

To have your floors treated by our sister company’s technicians, anywhere in the continental US, call 781-598-2020 for details.

Four Year Guarantee:

Trusty-Step International Guarantees that No. 1001 TRUSTY-STEP ANTI-SLIP FLOOR & BATHTUB TREATMENT, when applied according to the instructions provided, will raise the static coefficient of friction on hard mineral surfaces (ceramic, quarry & porcelain tile, marble, granite, terrazzo and cement) to 0.6.

Routine cleaning and maintenance to remove grease, oil or other substances is required. This Guarantee shall only provide for supplying enough No. 1001 TRUSTY-STEP ANTI-SLIP FLOOR & BATHTUB TREATMENT at no cost, to re-treat any surface that is found to lose its non-slip effectiveness. This Guarantee shall be void if the SCOF of a treated surface falls below 0.6 because of the presence of a foreign substance. It does not cover compensation for injuries or losses due to slip/fall accidents or other direct, indirect or consequential damages resulting from the failure of any treated surface to retain a SCOF of 0.6,regardless of the legal theory asserted, including negligence and strict liability.

If any Trusty-Step Product is proved defective, the user's exclusive remedy will be, at Trusty-Step International’s option, to replace the defective product or to refund the purchase price for the defective amount. Except for the replacement or refund remedies, Trusty-Step International is not liable for the direct damages or consequential damages, regardless of the legal theory asserted, including negligence and strict liability.

Money Back Guarantee:

If you are not completely satisfied with the performance of any Trusty-Step Product for any reason, simply return within 30 days of invoice for a full refund.